DTF Care & Maintenance

Proper care and maintenance are essential to preserve the look, durability, and longevity of your DTF-printed apparel.
Following these guidelines will help ensure your garments stay vibrant and intact after repeated washes.

Before Washing

  • Wait at least 24 hours after pressing before washing

  • Allow the adhesive to fully cure before exposing the garment to water or heat

This initial curing period is critical for long-term adhesion.

Washing Instructions

For best results:

  • Turn garments inside out

  • Wash using cold water

  • Use mild detergent

  • Wash with similar colors

Avoid harsh detergents, fabric softeners, and bleach, as these can weaken the adhesive over time.

Drying Instructions

  • Hang dry whenever possible

  • If using a dryer, select low heat only

High heat can damage the transfer and cause premature cracking or lifting.

Ironing Guidelines

  • Do not iron directly on the printed design

  • If ironing is needed, turn the garment inside out or place a cloth between the iron and the print

  • Avoid steam on the printed area

Storage Recommendations

  • Store garments in a cool, dry place

  • Avoid prolonged exposure to direct sunlight

  • Do not fold garments tightly over the printed area

Proper storage helps prevent cracking and adhesion loss.

Common Causes of Transfer Damage

Most DTF issues occur due to:

  • Excessive heat during washing or drying

  • Improper press settings during application

  • Washing too soon after pressing

  • Ironing directly on the design

Following care instructions significantly reduces these risks.

Long-Term Durability Tips

  • Test press settings before full production

  • Avoid over-pressing during application

  • Use recommended heat press settings for fabric type

  • Follow wash and care guidelines consistently

Well-applied and properly cared-for DTF transfers can withstand many wash cycles without loss of quality.

Important Notice

Xpress DTF Supply is not responsible for damage caused by improper application, washing, drying, or garment care.
Following the instructions provided is the responsibility of the end user.

Need Help?

If you have questions about care, pressing, or fabric compatibility, contact Xpress DTF Supply before production or distribution.